Proline Prowirl R 200 HART System integration
Endress+Hauser 69
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.03.00 • On the title page of the Operating Instructions
• On the transmitter nameplate
• Firmware version parameter
Diagnostics → Device information → Firmware
version
Release date of firmware version 01.2018 ---
Manufacturer ID 0x11 Manufacturer ID parameter
Diagnostics → Device information → Manufacturer ID
Device type ID 0x38 Device type parameter
Diagnostics → Device information → Device type
HART protocol revision 7 ---
Device revision 4 • On the transmitter nameplate
• Device revision parameter
Diagnostics → Device information → Device revision
For an overview of the different firmware versions for the device
9.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
HART protocol
Sources for obtaining device descriptions
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
DeviceCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
• Field Xpert SFX350
• Field Xpert SFX370
Use update function of handheld terminal
AMS Device Manager
(Emerson Process Management)
www.endress.com → Download Area
SIMATIC PDM
(Siemens)
www.endress.com → Download Area
Field Communicator 475
(Emerson Process Management)
Use update function of handheld terminal
9.2 Measured variables via HART protocol
The following measured variables (HART device variables) are assigned to the dynamic
variables at the factory:
To Next Page
Loading...
