Endress+Hauser Proline Prowirl R 200 - For the Sensor; Communication-Specific Accessories

Accessories Proline Prowirl R 200 HART
170 Endress+Hauser
Accessories Description
Overvoltage protection for
2-wire devices
Ideally, the overvoltage protection module should be ordered directly with the
device. See product structure, characteristic 610 "Accessory mounted", option NA
"Overvoltage protection". Separate order necessary only if retrofitting.
• OVP10: For 1-channel devices (characteristic 020, option A):
• OVP20: For 2-channel devices (characteristic 020, options B, C, E or G)

Special Documentation SD01090F
(Order number OVP10: 71128617)
(Order number OVP20: 71128619)
Protective cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight or extreme cold in winter.

Special Documentation SD00333F
(Order number: 71162242)
Connecting cable for
remote version
• Connecting cable available in various lengths:
– 5 m (16 ft)
– 10 m (32 ft)
– 20 m (65 ft)
– 30 m (98 ft)
• Reinforced cables available on request.

Standard length: 5 m (16 ft)
Is always supplied if no other cable length has been ordered.
Post mounting kit Post mounting kit for transmitter.

The post mounting kit can only be ordered together with a transmitter.
(Order number: DK8WM-B)
15.1.2 For the sensor
Accessories Description
Flow conditioner Is used to shorten the necessary inlet run.
(Order number: DK7ST)
15.2 Communication-specific accessories
Accessories Description
Commubox FXA195
HART
For intrinsically safe HART communication with FieldCare via the USB interface.

Technical Information TI00404F
Commubox FXA291 Connects Endress+Hauser field devices with a CDI interface (= Endress+Hauser
Common Data Interface) and the USB port of a computer or laptop.

Technical Information TI405C/07
HART Loop Converter
HMX50
Is used to evaluate and convert dynamic HART process variables to analog current
signals or limit values.

• Technical Information TI00429F
• Operating Instructions BA00371F
Wireless HART adapter
SWA70
Is used for the wireless connection of field devices.
The WirelessHART adapter can be easily integrated into field devices and existing
infrastructures, offers data protection and transmission safety and can be operated
in parallel with other wireless networks with minimum cabling complexity.

Operating Instructions BA00061S