Endress+Hauser Proline Prowirl R 200 - Process Variables

Proline Prowirl R 200 HART Operation
Endress+Hauser 137
11.4.1 Process variables
The Process variables submenu contains all the parameters needed to display the current
measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Process variables
‣
Process variables
Volume flow
→  137
Corrected volume flow
→  137
Mass flow
→  138
Flow velocity
→  138
Temperature
→  138
Calculated saturated steam pressure
→  138
Energy flow
→  138
Heat flow difference
→  138
Reynolds number
→  138
Density
→  138
Specific volume
→  139
Pressure
→  139
Compressibility factor
→  139
Degrees of superheat
→  139
Parameter overview with brief description
Parameter Prerequisite Description User interface
Volume flow – Displays the volume flow currently
measured.
Dependency
The unit is taken from the Volume flow
unit parameter (→  77).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  77).
Signed floating-point
number