Endress+Hauser Proline Prowirl R 200 - Page 138

Operation Proline Prowirl R 200 HART
138 Endress+Hauser
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow currently
calculated.
Dependency
The unit is taken from the Mass flow
unit parameter (→  77).
Signed floating-point
number
Flow velocity – Displays the flow velocity currently
calculated.
Dependency
The unit is taken from the Velocity
unit parameter (→  79).
Signed floating-point
number
Temperature – Displays the temperature currently
measured.
Dependency
The unit is taken from the
Temperature unit parameter
(→  78).
Signed floating-point
number
Calculated saturated steam pressure The following conditions are met:
• Order code for "Sensor version",
– option "Mass (integrated
temperature measurement)"
or
– option "Mass (integrated pressure/
temperature measurement)"
• The Steam option is selected in the
Select medium parameter
(→  80).
Displays the saturated steam pressure
currently calculated.
Dependency
The unit is taken from the Pressure
unit parameter (→  78).
Signed floating-point
number
Energy flow With order code for "Sensor version":
• option "Mass (integrated
temperature measurement)"
or
• option "Mass (integrated pressure/
temperature measurement)"
Displays the energy flow currently
calculated.
Dependency
The unit is taken from the Energy flow
unit parameter (→  78).
Signed floating-point
number
Heat flow difference The following conditions are met:
• Order code for "Sensor version"
– option "Mass (integrated
temperature measurement)"
or
– option "Mass (integrated pressure/
temperature measurement)"
• One of the following options is
selected in the Select gas type
parameter (→  80):
Single gas
Gas mixture
Natural gas
User-specific gas
Displays the heat flow difference
currently calculated.
Dependency
The unit is taken from the Energy flow
unit parameter (→  78).
Signed floating-point
number
Reynolds number With order code for "Sensor version":
• option "Mass (integrated
temperature measurement)"
or
• option "Mass (integrated pressure/
temperature measurement)"
Displays the Reynolds number currently
calculated.
Signed floating-point
number
Density With order code for "Sensor version":
• Option "Mass (integrated
temperature measurement)"
or
• Option "Mass (integrated pressure/
temperature measurement)"
Displays the density currently
measured.
Dependency
The unit is taken from the Density unit
parameter.
Positive floating-point
number