Endress+Hauser Proline Prowirl R 200 - 15 Accessories; Device-Specific Accessories; For the Transmitter

Proline Prowirl R 200 HART Accessories
Endress+Hauser 169
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1 For the transmitter
Accessories Description
Prowirl 200 transmitter Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output, Input
• Display/operation
• Housing
• Software

Installation Instructions EA01056D
(Order number: 7X2CXX)
Remote display
FHX50
FHX50 housing for accommodating a display module .
• FHX50 housing suitable for:
– SD02 display module (push buttons)
– SD03 display module (touch control)
• Length of connecting cable: up to max. 60 m (196 ft)
(cable lengths available for order: 5 m (16 ft), 10 m (32 ft), 20 m (65 ft),
30 m (98 ft))
The measuring device can be ordered with the FHX50 housing and a display
module. The following options must be selected in the separate order codes:
• Order code for measuring device, feature 030:
Option L or M "Prepared for FHX50 display"
• Order code for FHX50 housing, feature 050 (device version):
Option A "Prepared for FHX50 display"
• Order code for FHX50 housing, depends on the desired display module in feature
020 (display, operation):
– Option C: for an SD02 display module (push buttons)
– Option E: for an SD03 display module (touch control)
The FHX50 housing can also be ordered as a retrofit kit. The measuring device
display module is used in the FHX50 housing. The following options must be
selected in the order code for the FHX50 housing:
• Feature 050 (measuring device version): option B "Not prepared for FHX50
display"
• Feature 020 (display, operation): option A "None, existing displayed used"

The FHX50 remote display cannot be combined with the order code for
"Sensor version; DSC sensor; measuring tube":
• option DA "Mass steam; 316L; 316L (integrated pressure/temperature
measurement), –200 to +400 °C (–328 to +750 °F)"
• option DB "Mass gas/liquid; 316L; 316L (integrated pressure/temperature
measurement), –40 to +100 °C (–40 to +212 °F)"

Special Documentation SD01007F
(Order number: FHX50)