Endress+Hauser Proline Prowirl R 200 - Performing External Compensation

Commissioning Proline Prowirl R 200 HART
110 Endress+Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Mol% SO2 The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Sulfur
dioxide SO2 option is
selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% Xe The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Xenon Xe
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% other gas The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Others
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
10.5.2 Performing external compensation
The External compensation submenu contains parameters which can be used to enter
external or fixed values. These values are used for internal calculations.
Navigation
"Setup" menu → Advanced setup → External compensation
‣
External compensation
External value
→  111
Atmospheric pressure
→  111
Delta heat calculation
→  111
Fixed density
→  111
Fixed density
→  111
Fixed temperature
→  111