Endress+Hauser Proline Prowirl R 200 - Page 81

Proline Prowirl R 200 HART Commissioning
Endress+Hauser 81
Parameter Prerequisite Description Selection / User
entry
Factory setting
Gas type The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Single gas
option is selected.
Select measured gas type. • Hydrogen H2
• Helium He
• Neon Ne
• Argon Ar
• Krypton Kr
• Xenon Xe
• Nitrogen N2
• Oxygen O2
• Chlorine Cl2
• Ammonia NH3
• Carbon monoxide
CO
• Carbon dioxide
CO2
• Sulfur dioxide SO2
• Hydrogen sulfide
H2S
• Hydrogen chloride
HCl
• Methane CH4
• Ethane C2H6
• Propane C3H8
• Butane C4H10
• Ethylene C2H4
• Vinyl Chloride
C2H3Cl
Methane CH4
Relative humidity The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Air option is
selected.
Enter humidity content of air
in %.
0 to 100 % 0 %
Steam calculation mode The Steam option is selected
in the Select medium
parameter parameter.
Select calculation mode of
steam: based on saturated
steam (T-compensated) or
automatic detection (p-/T-
compensated).
• Saturated steam
(T-compensated)
• Automatic (p-/T-
compensated)
Saturated steam (T-
compensated)
Select liquid type The following conditions are
met:
• Order code for "Sensor
version",
– Option "Mass (integrated
temperature
measurement)"
or
– Option "Mass (integrated
pressure/temperature
measurement)"
• The Liquid option is
selected in the Select
medium parameter
parameter.
Select measured liquid type. • Water
• LPG (Liquefied
Petroleum Gas)
• User-specific liquid
Water