TS-10 Musician’s Manual Section 8 — Understanding Programs
33
KICK DRUMS
SNARE DRUMS
HI-HATS
CYMBALS
TOM TOMS
MISC. PERCUSSION
Ensoniq Drum Map
How to Create a Drum-Map
• Select a program into which you want to install a custom drum-map.
• Press Program Control. The display shows the Program Control page:
• Make sure OPTION=
*-NONE-*
is underlined.
• Press the Up Arrow button. The display reads:
Whenever you create a custom drum-map, the TS-10 will delete voices 5 and 6, and use the
memory normally occupied by those parameters to store the drum-map.
• Press the soft button underneath DRUM-MAP to replace voices 5 & 6, and create a new default
drum-map in the program. Selecting DRUM-MAP will also display the Select Voice page with
the Edit Drum-Map option activated. Note that the Program Control page will now show
OPTION=DRUM-MAP to indicate that a drum-map is active in the program. The display
looks something like this:
• Select one of the four available voices. In the example above, the first voice is selected
To Next Page
Loading...
Need help?
General
