Section 10 — Understanding the Sequencer TS-10 Musician’s Manual
14
to put the sound of your choice on the selected track.
• Press Record/Play to begin recording. The click track will play for one measure (assuming
COUNTOFF= REC or CLICK), then the sequencer will enter record mode. It will record
whatever you play on the new track until:
1) the end of the sequence is reached, or
2) you press Stop/Continue (or press the assigned AUX Foot Switch).
At the end of the sequence, the TS-10 will leave record mode and (assuming LOOP=ON) enter
Audition mode.
About the Audition Play/Keep Page
• Press Stop/Continue or the assigned AUX Foot Switch to stop the Sequencer. This puts you
onto the Audition Play/Keep page:
• Press PLAY ORIGINAL TRACK to hear the track as it was before you recorded the new track.
The first time you record a particular track, this isn’t very useful, but it is invaluable when you
begin to do second and third takes, since it allows you to compare the tracks before deciding
which to keep.
• Press PLAY NEW TRACK to hear what you just recorded.
• Press KEEP ORIGINAL TRACK to leave the track as it was in memory, and delete the one you
just recorded. If the track was empty before recording, pressing this button will leave it
empty.
• Press KEEP NEW TRACK to save the new track into memory, replacing whatever was on the
track before.
The Audition page appears after all track recording and after all track edit functions. The TS-10
always gives you a chance to audition changes to the track data before deciding whether to keep
them.
Playing Tracks in Audition Mode
It is possible to alternate between playing Original and New tracks in Audition mode without
having the track restart from the beginning, making comparisons more convenient. If the
sequencer is playing, each time Play New or Play Original is selected, the context will instantly
switch. Pressing Play will play the selected track from the beginning.
When ineligible buttons are pressed while in Audition mode, a message appears to indicate that
it is necessary to decide which version of the most recently recorded track is to be kept before the
desired action can be performed. The message appears momentarily, and then the display
changes back to the Audition page.
To Next Page
Loading...
Need help?
General
