Epson C Series - Page 255

C8 Maintenance 4. Cable Unit
C Series Maintenance Manual Rev.2 235
42.
Pull out the separated cable unit (base side) from the Arm #1 side to
the Arm #2 side.
To protect the connectors and facilitate the work, first cover the
connectors with a plastic bag. Then, pass the cable unit through the
arm.
43.
Remove the Arm #3 cable fixing plate 2.
Hexagon socket head cap bolts: 2-M4×10
44.
Remove the Arm #3 cable bracket (C4) and the cable protection sheet.
Hexagon socket head cap bolts: 2-M3×6
C8XL:
Remove the cable bracket (C4) and the cable protection sheet at the
Arm #4 maintenance cover.
Hexagon socket head cap bolts: 2-M3×6