Epson C Series - Arm #2 Side Cover; Arm #3 Head Cover

C4 Maintenance 3. Covers
16 C Series Maintenance Manual Rev.2
3.3 Arm #2 Side Cover
CAUTION
■
When
mounting the cover, be careful not to get the cables caught in it or bend
the
m forcibly to push into the cover.
Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure.
These are extremely hazardous and may result in electric
shock and/or improper function of
the robot system.
When
routing the cables, check the cable locations at removing the cover.
Be sure to
place the cables back to their original locations.
Arm #2 side cover
4-M3×8
(Cross recessed truss
head small screws)
Tightening torque:
0.45±0.1 N·m
4-M3×8
(Cross recessed truss
head small screws)
Tightening torque:
0.45±0.1 N·m
3.4 Arm #3 Head Cover
CAUTION
■
When
mounting the cover, be careful not to get the cables caught in it or bend
the
m forcibly to push into the cover.
Unnecessary strain on cables may result in damage to the cables, disconnection,
and/or contact failure.
These are extremely hazardous and may result in electric
shock and/or improper function of the robot system.
When
routing the cables, check the cable locations at removing the cover.
Be sure to
place the cables back to their original locations.
Arm#3 head cover
4-M3×8
(Cross recessed truss
head small screws)
Tightening torque:
0.45±0.1 N·m