Epson C Series - Page 51

C4 Maintenance 4. Cable Unit
C Series Maintenance Manual Rev.2 31
8.
Insert the cable unit with the cable protection spring (ø 29) from the
Arm #1 to the base side.
Connectors to be passed through to the base:
X12, X020, X030, X13, X040, X050, X060,
X14, X15, X16, XGND, BR011, BR010, BT1,
BR020, BR030, BR040, BR050, BR060,
LED, SW1, GS01, GS02
9.
Pull the wrapped cables from the Arm #2.
10.
Pass the cable unit to the Arm #3.