Epson C Series - Page 62

C4 Maintenance 4. Cable Unit
42 C Series Maintenance Manual Rev.2
44.
Temporarily fix the cables to the cable binder.
Wire tie: AB150
Mark tube: 23 mm (2 tubes)
Mark tube
45.
Push the cable in the direction of an arrow in the photo on the right,
and fix the cable temporarily fixed by the wire tie.
Pushing depth: 6 mm
46.
Fix the cable protection spring (ø25, 130 mm)
to the Arm #1 cable
fixing plate.
Wire tie: AB100 (2 ties)
Number of turns of spring to fix: 3 turns
47.
Temporarily fix the cables to the Arm #1 cable fixing plate.
Wire tie: AB150 (2 ties)
Mark tube: 68 mm (2 tubes)
Set the heads of the wire ties to the side of the cables as shown in the
photo on the right.