Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 174
Confidential
13. Disconnect the ink tubes from the tube connectors below.
When removing INK TUBE, LEFT
Disconnect the tubes connected to the valves on the right side (as seen
from the rear).
When removing INK TUBE, RIGHT
Disconnect the tubes connected to the valves on the left side (as seen
from the rear).
Figure 4-154. Removing the ink tubes
The tube connectors include “O-RINGs” (black rubber rings).
To prevent any leak, those O-RINGs have to be replaced with
new ones if the connectors are once opened.
When replacing the ink tubes with new ones, transfer the rings
indicating their ink colors to the corresponding new tubes.
To Next Page
Loading...
