Epson Stylus Pro GS6000 - System Requirements and Connection

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 88
Confidential
4.4.3.3 MAINTE COVER T
1. Remove the TOP COVER (left only). (p85)
2. Push and open the MAINTENANCE COVER ASSY (left only). See Figure 4-26.
3. Remove the five screws.
A) Silver, Phillips, Pan with S.W & P.W M4x8: five pieces
4. Pull the right side of the MAINTE COVER T and slide it up to the rear to remove
it.
Figure 4-20. Removing the MAINTE COVER T
A
MAINTE COVER T
When attaching the MAINTE COVER T, make sure to insert the
rib on the left under the SIDE COVER (left).
MAINTE COVER T
Rib
SIDE COVER (left)