Epson Stylus Pro GS6000 - Page 95

Epson Stylus Pro GS6000 Revision F
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 95
Confidential
4.4.3.12 REAR COVER
This part is not specified as an ASP.
1. Remove the TOP COVER (both). (p85)
2. Remove the ten screws.
A) Silver, Phillips, Cup M3x6: five pieces
B) Silver, Phillips, Pan with S.W & P.W M4x8: five pieces
3. Lift the REAR COVER up and remove it.
Figure 4-33. Removing the REAR COVER
REAR COVER
B
A
As seen from the rear