Epson Stylus Scan 2000 User Manual

1-4 EPSON Stylus Scan Parts and Functions
Buttons
Button Function
P
power
Turns the Stylus Scan on and off.
Hold the load/eject button down when turning the power on
to print a status and pattern sheet.
E
Load/eject
Press and release quickly to feed paper into or eject paper
from the paper feeder. If print head is in the ink cartridge
change position, it returns to the home position.
Hold for three seconds to move to the color or black ink
cartridge to its change position.
R
Cleaning
When the print head is at cartridge change position, press
and release quickly to return the print head to the home
position or to move another change position.
Hold for three seconds and release quickly to clean the print
head.
If the ink in either cartridge is low or if a cartridge is missing,
hold for three seconds and release quickly to move the print
head to the cartridge replacement position.
y
Stop/clear
Before copying, press to eject the original document from
the document feeder.
When copying is in progress, press to cancel copying and
eject the original document.
x
Copy
Press to start copying.
Copy mode If the reduce/enlarge light is on, press this button once to
enable copy-mode selection. The selector light for the
currently selected copy mode comes on.
Once the reduce/enlarge light is off, press this button to
change the copy setting. You can choose from
B/W, Grayscale, and Color.
Reduce/
enlarge
Selects the copy magnification.
If the reduce/enlarge light is off, press this button once to
enable reduce/enlarge selection. The selector light for the
currently selected magnification rate comes on.
Once the reduce/enlarge light is on, press this button to
change the magnification setting. You can choose between:
100%, 70%, 93%, and 141%.

Epson Stylus Scan 2000 Specifications

General

Brand	Epson
Model	Stylus Scan 2000
Category	All in One Printer
Language	English