12-22 Troubleshooting
A corner of the image is missing
Using a protection sheet
Try using a protection sheet. If you are already using a protection
sheet, make sure your photo or document is as straight as possible
in the protection sheet and that the sheet is loaded straight in the
document feeder.
The placement of text and graphics on the page is
incorrect
Scanned images come out slanted
The paper guides are not adjusted correctly
Verify that the guides in the document tray fit snugly against the
document you are scanning.
Scanned quality is poor
Scanned images look faded when I try to print them
If you are scanning a photograph, make sure you have selected
Photo in the EPSON SMART PANEL dialog box.
Check the Quality and Resolution Settings in EPSON TWAIN.
Scanned or copied photographs look too dark or have no detail
If you are scanning a photograph, make sure you have selected
Photo in the EPSON SMART PANEL dialog box.
Vertical lines are missing from the scanned image or copy
The scanner glass may need cleaning
Correcting fluid, dust particles, paper, or tape may be stuck to the
scanner glass, causing a vertical white streak through the image.
To clean the scanner glass, see “Cleaning the EPSON Stylus Scan”
on page 11-14.
To Next Page
Loading...
Need help?
General
