Epson Stylus Scan 2000 - The Stylus Scan Does Not Print or Copy

12-12 Troubleshooting
❏ Ink may have leaked inside the EPSON Stylus Scan. Wipe the
inside of the Stylus Scan with a soft, clean cloth.
The Stylus Scan does not print or copy
If one of the following problems has occurred, try the solutions
listed for that problem.
❏ All lights are off
❏ Lights came on and then went out
❏ Only the
P power light is on
❏ The
E paper out light is flashing or on.
❏ One of the ink out lights is flashing or on.
❏ All lights are flashing.
All lights are off
❏ Press the [icon] power button and make sure the EPSON
Stylus Scan is on.
❏ Turn off the Stylus Scan and make sure the power cord is
securely plugged in.
Wipe here.