Epson Stylus Scan 2000 User Manual

Maintenance 11-9
Note:
To maintain print quality, EPSON recommends turning on the Stylus
Scan for at least one minute every month.
Using the control panel buttons
1. Make sure that the P power light is on and that both the
B black and A color ink out lights are off.
2. Hold down the
R cleaning button for three seconds, then
release it.
The EPSON Stylus Scan starts cleaning the print head and the
P power light begins flashing. Print head cleaning takes
about one minute to complete.
c
Caution:
Never turn off the Stylus Scan while the
P power light is
flashing. Doing so may damage the mechanism.
Note:
If the
B black or A color ink out light is flashing or on, pressing the
R cleaning button starts the ink cartridge replacement procedure.
If you do not want to replace an ink cartridge at this moment, press
the
R cleaning button again and release it quickly to return the
print head to its home position.

Epson Stylus Scan 2000 Specifications

General

Brand	Epson
Model	Stylus Scan 2000
Category	All in One Printer
Language	English