Troubleshooting 12-25
A communication error occurs during printing or
scanning
Make sure the ECP mode is turned on in your computer’s BIOS.
For details, see your computer’s documentation.
If the errors continue to occur, follow the steps below:
1. Click Start, then Run.
2. Type EPLPTDMA in the Open box, then click OK.
3. The following dialog box appears. Clear the check box that
appears beside the name of the port to which you have
connected the Stylus Scan, then click OK.
Note:
Unavailable ports appear dimmed.
4. Restart Windows.
To Next Page
Loading...
