Product Specifications B-15
For Macintosh computers
You can use this printer with the following Apple
®
Macintosh
®
computers. You also need a shielded USB cable.
Applicable computer models
iMac Series (for USB)
Power Macintosh G3 (for USB)
Your Macintosh must also meet the following system
requirements.
Note:
Macintosh can be connected to the Stylus Scan by using a USB cable
only.
Note:
❏ The amount of available memory varies according to the number and
kind of applications that are open. To see how much memory is
available, choose About This Computer
from the Apple menu and
refer to the memory size (listed in kilobytes) under
Largest Unused
Block
(1,024K=1 MB).
❏ The memory requirements above are for printing on Letter size
paper. These requirements may vary depending on the size of the
paper, the type of application you are using, and the complexity of
the document you want to print.
In addition to these system and memory requirements, you also
need 10 MB of free hard disk space to install your printer software.
To print, you need extra hard disk space amounting to about
double the size of the file you want to print.
Minimum System Requirements Recommended System
System 8.1 + iMac update System 8.5.1 or later
7 MB of available memory
12 MB of available memory when
background printing is turned on.
14 MB or more of available memory
23 MB of available memory when
background printing is turned on.
To Next Page
Loading...
Need help?
General
