Replacing Ink Cartridges 10-11
Using the Status Monitor 3
You can monitor the remaining ink level from your computer and
view on-screen instructions for replacing a low or empty ink
cartridge.
When an ink cartridge is low or empty and you are ready to
replace it, click the How To button in the Status Monitor’s Printer
Status window. The print head moves to the ink cartridge
replacement position. Follow the on-screen instructions to replace
the cartridge.
Replacing an Old or Damaged Ink Cartridge
In some circumstances you may need to replace an ink cartridge
before it is empty. For example, if the quality of your prints and
copies remains poor even after repeated cleaning and aligning of
the print head, one or both of the ink cartridges may be old or
damaged and should be replaced.
To replace an ink cartridge before the
A
color or
B
black ink out
light flashes, follow these steps.
If the
A
color or
B
black ink out light is flashing or is on, replace
the empty ink cartridge as described in “Replacing Empty Ink
Cartridges” on page 10-2.
c
Caution:
❏ Once you remove an ink cartridge, it becomes unusable and
cannot be reinstalled even if ink remains.
❏ Leave the old cartridge installed in the EPSON Stylus Scan
until you are ready to replace it with a new one.
1. Make sure the Stylus Scan is on. The
P
power light should be
on, but not flashing.
2. Lower the output tray; then open the front cover.
To Next Page
Loading...
Need help?
General
