Loading the Paper 3-9
Loading
❏ Load the paper printable side up with the perforated margins
positioned as shown below.
❏ Use flat, undamaged paper. If the paper or the support sheet
is curled, flatten it before loading to avoid paper feeding
problems.
❏ Always place the included support sheet under the stack of
Photo Paper, but do not print on it.
❏ You can load up to 20 sheets of 4
×
6 inch Photo Paper or 1
sheet of 200 × 300 mm Photo Paper into the paper feeder.
❏ Cut or tear the paper at the perforation only after printing. Do
not cut, tear, or fold the paper before printing.
❏ Select Photo Paper as the Media Type setting, and Photo
Paper 4 × 6 in or Photo Paper 200 × 300 mm as the Paper
Size setting in your printer driver.
loading position
To Next Page
Loading...
Need help?
General
