Loading the Paper 3-7
About special media cleaning sheets
Do not use the cleaning sheets packaged with EPSON special
media with the Stylus Scan. These sheets are not needed with the
Stylus Scan and may cause jams.
Loading Envelopes
When printing on envelopes, please note the following:
❏ You can load up to ten envelopes at a time into the paper
feeder.
Note:
The folding quality and thickness of envelopes vary widely. If the
total thickness of the stack of envelopes exceeds ten millimeters, press
the stack flat before loading.
❏ Set the adjust lever to the “+” position. To do this, open the
front cover and reposition the lever.
Note:
❏ Be sure to return the adjust lever to the “0” position before
printing or copying onto media of normal thickness. Leaving
the lever in the “+” position may cause gaps in the printed
image.
❏ When the adjust lever is in the “+” position, make sure the High
Speed setting in the printer driver’s Advanced dialog box is
cleared. To turn this option off, you may also need to change the
Print Quality setting.
To Next Page
Loading...
Need help?
General
