3-6 Loading the Paper
❏ If the paper is curled, make sure to flatten it or curl it slightly
toward the opposite side before loading. Printing on curled
paper may smear your printout, especially when printing
with Maximum selected as the Printable Area setting.
❏ If printing is smeared, change the adjust lever to the “+”
position. To change the setting, open the front cover and set
the lever as shown in the illustration.
Note:
❏ Be sure to return the adjust lever to the “0” position before
printing or copying onto media of normal thickness. Leaving
the lever in the “+” position may cause gaps in the printed
image.
❏ When the adjust lever is in the “+” position, make sure the High
Speed setting in the printer driver’s Advanced dialog box is
cleared. To turn this option off, you may also need to change the
Print Quality setting.
To Next Page
Loading...
Need help?
General
