Epson Stylus Scan 2000 - Replacing a Color Ink Cartridge

Replacing Ink Cartridges 10-3
Note:
You cannot continue printing with one ink cartridge empty, even if the
other cartridge still contains ink. Before printing, replace the empty
cartridge.
Replacing a color ink cartridge
To replace an ink cartridge using the EPSON Stylus Scan’s control
panel, follow the steps below.
1. Lower the output tray on the front of the EPSON Stylus Scan,
and then open the front cover.
2. Hold down the
R cleaning button for three seconds, then
release it. The printer head moves to the replacement position
for the color ink cartridge and the
P power light begins
flashing.
c
Caution:
Do not move the print head by hand, as doing so may damage
the mechanism.