Epson Stylus Scan 2000 User Manual

2-4 Safety Instructions
❏ If ink gets on your skin, wash it off with soap and water. If
ink gets into your eyes, flush eyes immediately with water.
❏ Do not shake the ink cartridges. Cartridges may leak if
shaken.
❏ Install the ink cartridge immediately after you remove it from
its package. Leaving the cartridge unpacked for a long time
before use may result in reduced print quality.
❏ Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
Otherwise the cartridge may become unusable.
❏ Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
❏ Do not dismantle the ink cartridges or try to refill them. Doing
so may damage the print head.
When choosing a place for the Stylus Scan
❏ Place the EPSON Stylus Scan on a flat, stable surface that
extends beyond the Stylus Scan base in all directions. The
Stylus Scan will not operate properly if it is tilted or at an
angle.
❏ Avoid places subject to rapid changes in temperature and
humidity. Also, keep the Stylus Scan away from direct
sunlight, strong light, and heat sources.
❏ Avoid places subject to shocks and vibrations.
❏ Leave enough room around the Stylus Scan to allow for
sufficient ventilation.
❏ Place the Stylus Scan near a wall outlet where the plug can be
easily unplugged.

Epson Stylus Scan 2000 Specifications

General

Brand	Epson
Model	Stylus Scan 2000
Category	All in One Printer
Language	English