10-16 Replacing Ink Cartridges
10. Place the cartridge gently into the cartridge holder. Do not
press down on the cartridge. Then press the ink cartridge
clamp down until it locks in place.
11. Press the
E
load/eject button again and release it quickly. The
Stylus Scan moves the print head back to its home position
and charges ink in the system.
c
Caution:
The
P
power light continues to flash while the Stylus Scan
performs the ink charging operation. Never turn off the
Stylus Scan while the
P
power light is flashing. Doing so
can result in incomplete charging of ink.
To Next Page
Loading...
