Maintenance 11-13
The screen profile contains calibration information for the
previewed image as well as the scanned image.
For Macintosh Users
1. Click the EPSON Screen Calibration icon in the EPSON
Scanner dialog box. The following dialog box appears.
2. Move the slider to the right or left until the two shades of the
gray horizontal stripes match.
3. Click OK to finish calibrating your scanner and monitor.
The gray stripes will not perfectly blend together; however, try to
make the different tones match as closely as possible.
The screen profile contains calibration information for the
previewed image as well as the scanned image.
To Next Page
Loading...
