Troubleshooting 12-9
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
Horizontal banding
Try one or more of these solutions.
❏ Make sure the printable side of the paper is face up in the
paper feeder.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
❏ Select the Automatic mode in your printer driver’s Main
menu (Windows) or Print dialog box (Macintosh).
❏ Check the
B
black and
A
color ink out lights. If a light is
flashing, replace the appropriate ink cartridge. See
“Replacing Empty Ink Cartridges” on page 10-2.
❏ Make sure the Maximum Printable Area setting in your
printer driver is turned off. When this setting is on, banding
may occur in the expanded area.
Vertical misalignment or banding
Try one or more of these solutions.
❏ Make sure the printable side of the paper is face up in the
paper feeder.
❏ Run the Print Head Alignment utility.
❏ Turn off the High Speed setting in your printer driver.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
To Next Page
Loading...
Need help?
General
