Troubleshooting 12-27
3. Click the Details tab and make sure that EPUSBx: (EPSON
Stylus Scan 2000) is displayed in the Print to the following
port list box
4. If the correct port is not displayed, remove the USB cable, then
connect the Stylus Scan to the first tier of the hub, or connect
the Stylus Scan to the computer’s USB port directly.
Make sure that EPSON USB Printer Devices appears in the
Device Manager menu
If you canceled the plug-and-play driver installation before the
procedure completed, either the USB printer device driver or the
printer driver may be incorrectly installed.
Follow the steps below to check the installation and reinstall the
drivers.
1. Turn the Stylus Scan on. Plug the USB cable into the Stylus
Scan and the computer.
2. Right-click the My Computer icon on your desktop, then click
Properties.
3. Click the Device Manager tab.
To Next Page
Loading...
Need help?
General
