5-21
Sub-assembly I
Assembly
Step
Assembly ProcedurePart Name
16
17
18
Carriage assembly
Sub-assembly C
Shaft-Carriage guide-A
RE (2.3) x 1
Spring-Belt tension
• Attach the carriage assembly belt to the belt drive pulleys.
• Insert Shaft-Carriage guide A in the Carriage assembly through
hole M of the Print frame sub-assembly, and fasten it with the E-ring.
• Attach the Spring-Belt tension to hook N of the Tension plate
assembly and hook O of the Print frame sub-assembly.
• Push the Pulley-Belt drive in the ➡ direction to stretch the belt tight;
then tighten the tension plate screw firmly.
• Move the Spring-Belt tension from hook N to hook P (the spring
storing position).
CONFIDENTIAL
To Next Page
Loading...
