FAG Detector III - Back up Database; Bearing Database

102
If you delete a CM database, all configuration and measured
data will be removed irreversibly!
You cannot interrupt the delete process!
4.5.7 Back up database
You can back up database(s) as follows:
To make a backup of a database, you have to detach the database from the
database server (see "Detach database" ).
Start Windows Explorer and choose the directory where the database files are
located.
Copy both the MDF and the LDF file of the database, which you want to back up,
to da different location.
For backup, it is essential that you copy both database files!
Therefore always copy the MDF and the LDF file.
4.6 Bearing database
The Trendline database provides you with data on the most widely used bearings
for use in your individual configuration (see Setting up measuring point ).
You can also add your own bearings to the existing bearing data.
Furthermore, the Trendline bearing database also includes a group
administration feature which you can use, for example, to group bearings of
different makes that have similar characteristics.
Click Tools > Bearing database to open the bearing database.
Select the database as described in "Select database" . The name of the
included bearing database is "CM_BEARINGS". If you set it up during software
installation, it is automatically opened when you call the bearing database for the
first time. The program uses the default user name and the default password.
The bearing database opens.
98
58
104
106
93