The manufacturer
F'IS, FAG Industrial Services GmbH, Kaiserstraße 100,
D-52134 Herzogenrath
declares that the product
Detector III
Serial number: xxxxxx/F4 labelled without "RFID"
meets the requirements, w hich have been set by the Electromagnetic Compatibility
Directive (2004/108/EG), if the product is installed properly according to the installation
guidelines listed in the manual.
For assessment of the product the follow ing standards w ere used:
EN 61000-6-2:2001
EN 61000-6-4:2001
EN 55022:2003
Measuring device identifier: CE
Herzogenrath, 2010-01-22
To Next Page
Loading...
