69
Trendline 3
4.4.7 Add balancing configuration
To create a balancing configuration
click on a level 3 configuration element (machine or motor, for example).
Then click System > Add balancing configuration or click on .
General settings
RFID status
No RFID: No RFID tag is assigned to the measuring point.
Assign RFID: This option instructs the Detector to assign an RFID tag placed
on the machine to this measuring point during the next round.
RFID assigned: An RFID tag is assigned to the measuring point. The unique ID
is displayed in the RFID number field.
Remove RFID: This option instructs the Detector to cancel the RFID tag
assignment to the measuring point during the next round.
RFID defective: The Detector has marked the assigned RFID tag as defective.
Change RFID: This option tells the Detector to replace the assigned RFID tag.
During the next round, you must delete the tag and assign a new one before
To Next Page
Loading...
