98
4.5.3.2 Detach database
You can only detach a database if it is not being used
by the Trendline Software.
If you have disconnected the database from the
database server, you can only access the database
again with the Trendline software by reattaching the
database again.
You can detach a database from the SQL database server as follows:
Start the Database administration.
Click Detach.
Click on Connect to connect to the master database.
From the server list, select the database server that contains the database or
enter it manually there. You can click Refresh first in order to update the list of
available servers.
Click Use a specific user name and password and enter your user name and
password to log in to the master database.
Select the Allow saving the password option.
Select the "master" database from the database list and click OK.
Click Continue in the database administration.
Select the database to be detached in the database administration and click
OK.
Click on Execute. The database is detached.
4.5.3.3 Update database
Back up your Trendline database before updating it!
You can update a database as follows:
Start the Database administration.
Click Update.
Click on Connect to connect to the master database.
From the server list, select the database server that contains the database or
96
102
To Next Page
Loading...
