Declaration of conformity as per the Radio and Telecommunication Transmitter Devices
Act (FTEG) and Directive 1999/5/EG (R&TTE)
The manufacturer
F'IS, FAG Industrial Services GmbH, Kaiserstraße 100,
D-52134 Herzogenrath
declares that the product
Detector III
Serial number: xxxxxx/F4 labelled with "RFID"
Radio installation of device category 1
Purpose: RFID application
meets the requirements, w hich have been set by the Electromagnetic Compatibility
Directive (2004/108/EG) and by the standards on 1999/5/EG (R&TTE), if the product is
installed properly according to the installation guidelines listed in the manual.
For assessment of the product the follow ing standards w ere used:
ETSI EN 300 330-2 V1.3.1 (2006-04)
ETSI EN 301 489-3 V1.4.1 (2002-08)
EN 55022:2003
EN 60950-1:2001 and A11:2004 + Corrigendum:2004
EN 61000-6-2:2005
FCC 47 Part 2 and Part 15
ANSI C63.4:2003
The Detector III w ith RFID application is a radio device that operates at 13.65 MHz. This
product may be operated in the countries of the European Union, Sw itzerland, USA,
Canada and Australia.
Measuring device identifier: CE
Herzogenrath, 2010-03-02
To Next Page
Loading...
