FAG Detector III - Page 44

44
If the target already contains sub-elements, the moved/copied
element is always appended to the end of the list.
In order to shift or copy elements the following possibilities are available:
Moving an element
Left-click on the element, keep the mouse button pressed, and drag the
element onto the target element.
Release the mouse button to insert the element.
Or:
Right-click on the element and select Cut.
Right-click on the target element and select Insert.
Or:
Left-click on the element and
press the key combination CTRL+X or click on .
Left-click on the target element and
press CTRL+V or click on .
If you want to change the element order within a level,
select the element by left-click and
click on or .
Copying an element
Left-click on the element while pressing the CTRL key, keep the mouse button
and CTRL pressed, and drag the element onto the target element.
Release the mouse button and CTRL to copy the element.
Or:
Right-click on the element and select Copy.
Right-click on the target element and select Paste.
Or:
Right-click on the element, keep the mouse button pressed, and drag the
element onto the target element. A pop-up menu displays.
Select Move.
Or:
Left-click on the element and