59
Trendline 3
General settings
Reminder function for alarm limit adjustment
The Trendline software can remind you about the alarm limit adjustment .
Activate the checkbox Use reminder function for alarm limit adjustment and
choose when you want to be reminded.
RFID and comment options
In this section you can display and edit the status of an RFID tag assigned to the
measuring point and also set up the comment options on the Detector:
RFID status
No RFID: No RFID tag is assigned to the measuring point.
Assign RFID: This option instructs the Detector to assign an RFID tag placed
on the machine to this measuring point during the next round.
RFID assigned: An RFID tag is assigned to the measuring point. The unique ID
is displayed in the RFID number field.
87
To Next Page
Loading...
