94
The server list will be empty, if you are working with a restricted
Windows user account. In this case you have to enter "PC
name\CM_DATABASE" manually (if you use an older version of
Trendline software it is "PC name\FIS_DATABASE"). You can find
your PCs name above the disk drives in the Windows Explorer.
When your PCs name is "peters_laptop", then enter
"peters_laptop\CM_DATABASE" as server name.
If you are unsure about the computer name ask your administrator.
Database servers that have been added with , will be saved in the
list Server name and were automatically available next time you
open the program. You can delete items from this list by clicking .
2. Select user authentication
You have several options for the user authentication on the database server:
Check Use Windows authentication to use your Windows user name and
password.
Or:
Check Use user name and password and
activate Default user and password to use the default logon (see tip).
Or:
Check Use user name and password,
disable Default user and password and
enter your own user name and password for the selected database.
To access the database server a user account is
created during Trendline installation with the default
name "cmuser" and password "CM_services$1user".
For database server that have been installed with
Trendline software version 3.4 or earlier, the user name
is "sa" and the password "sql8".
If you use your own (custom) password, please enter
this one.
Further information in chapter "Users and passwords"
.
3. Select database
After selecting a database server in step 1, the available databases will be
displayed on the select list Database.
91
To Next Page
Loading...
