Fronius Pull User Manual

Fitting the SplitBox SB 60i R
Fitting the SB
60i R to the ro-
bot
NOTE!
Depending on the robot, please also note the instructions and information in the
User Information on installing the holding plate for the SplitBox.
The installation of the SplitBox SB 60i R is illustrated using the right version of
the appliance. The left version of the appliance should be installed the other way
around.
1 2
Fitting the SB
60i R to the bal-
ancer
NOTE!
▶
Use a balancer with a load capacity of at least 18 kg
▶
Use a second balancer for hosepacks longer than 1.75 m. Position the balan-
cer halfway along the length of the hosepack.
1
10,5 Nm
7.74 lb-ft
2
121
EN

Fronius Pull Specifications

General

Brand	Fronius
Model	Pull
Category	Welding System
Language	English