Fronius Pull User Manual

Interconnecting hosepack
General
The interconnecting hosepack connects the power source to the wirefeeder. With
the TPS/i welding system the interconnecting hosepack is available in two ver-
sions - one split and one standard variant.
-
3 / 5 / 10 / 15 m (extension - split variant)
-
CON hosepacks 4 / 5.5 / 8 / 10 / 15 / 16 m (continuous variant)
General
The interconnecting hosepack connects the power source to the SplitBox SB 60i
R.
The interconnecting hosepack is fixed in position on the SplitBox SB 60i R and is
available in the following preconfigured lengths:
-
3 m (extension - split variant)
-
4 / 6 / 8 m (connection - continuous variant)
60

Fronius Pull Specifications

General

Brand	Fronius
Model	Pull
Category	Welding System
Language	English