Fronius Pull User Manual

SplitBox SB 60i R
Device concept The SB 60i R and SB 60i R /L are devices for bringing together the welding media
in automated MIG/MAG welding and are specially designed for mounting on ro-
bots.
SB 60i R:
Right version of the appliance, for fitting to the right side of the robot
SB 60i R /L:
Left version of the appliance, for fitting to the left side of the robot
Proper use The device is designed exclusively for bringing together the welding media in
automated MIG/MAG welding applications in conjunction with Fronius system
components. Any use above and beyond this purpose is deemed improper. The
manufacturer shall not be held liable for any damage arising from such usage.
Utilisation in accordance with the intended purpose also comprises:
-
carefully reading these operating instructions
-
following all the instructions and safety rules in these operating instructions
-
performing all the stipulated inspection and maintenance work
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device
and all system components.
46

Fronius Pull Specifications

General

Brand	Fronius
Model	Pull
Category	Welding System
Language	English