SplitBox SB 500i R
Device concept The SplitBox (SB) 500i R, SB 500i R / L and SB 500i R PAP devices bring togeth-
er the welding media for automated MIG/MAG welding and have been specially
designed for mounting onto the robot. Two versions of the devices are available:
-
R = for applications in which the hosepack is externally mounted on the ro-
bot
-
PAP = for applications in which the hosepack is mounted in the robot arm
Proper use The device is designed exclusively for bringing together the welding media in
automated MIG/MAG welding applications in conjunction with Fronius system
components. Any use above and beyond this purpose is deemed improper. The
manufacturer shall not be held liable for any damage arising from such usage.
Utilisation in accordance with the intended purpose also comprises:
-
carefully reading these operating instructions
-
following all the instructions and safety rules in these operating instructions
-
performing all the stipulated inspection and maintenance work
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device
and all system components.
43
EN
To Next Page
Loading...
Need help?
General
