Fronius Pull User Manual

WF 60i Robacta Drive CMT
WF 60i Robacta
Drive CMT /G
Welding current at 10 min/40°C
M21 (EN 439) 60 % ED* / 260 A (Standard)
100 % ED* / 210 A (Standard)
60 % ED* / 260 A (CMT)
100 % ED* / 210 A (CMT)
C1 (EN 439) 60 % ED* / 320 A (Standard)
100 % ED* / 260 A (Standard)
60 % ED* / 260 A (CMT)
100 % ED* / 210 A (CMT)
Wire diameter 0.8 - 1.6 mm
0.032 - 0.063 inch
Supply voltage 60 V DC
Nominal current 1.5 A RMS
Wire speed 1 - 60 m/min
39.37 - 2362.20 ipm
Voltage measurement (V-Peak) for
mechanically driven welding torches
141 V
The product conforms to the requirements of the IEC 60974-7 standard
* D.C. = Duty cycle
WF 60i Robacta
Drive /W CMT
Welding current at 10 min/40°C
M21 (EN 439)
C1 (EN 439)
100 % ED* / 500 A (Standard)
100 % ED* / 280 A (CMT)
100 % ED* / 500 A (Standard)
100 % ED* / 280 A (CMT)
Wire diameter 0.8 - 1.6 mm
0.032 - 0.063 inch
Minimum coolant flow Q
min
1 l/min
0.26 gal (US) / min
Minimum coolant pressure p
min
3 bar
43 psi
Maximum coolant pressure p
max
5 bar
72 psi
Supply voltage 60 V DC
Nominal current 1.5 A RMS
Wire speed 1 - 60 m/min
39.37 - 2362.20 ipm
Voltage measurement (V-Peak) for
mechanically driven welding torches
141 V
187
EN

Fronius Pull Specifications

General

Brand	Fronius
Model	Pull
Category	Welding System
Language	English