Warning notices
on the device
The device is fitted with safety symbols and a rating plate. The safety symbols
and rating plate must not be removed or painted over. The safety symbols warn
against operating the equipment incorrectly, as this may result in serious injury
and damage.
Welding is dangerous. The following basic requirements must be met to ensure
the equipment is used properly:
-
Welders must be sufficiently qualified
-
Suitable protective equipment must be used
-
All persons not involved must be kept at a safe distance from the wirefeeder
and the welding process
Do not use the functions described here until you have fully read and understood
the following documents:
-
These Operating Instructions
-
All the Operating Instructions for the system components, especially the
safety rules
47
EN
To Next Page
Loading...
Need help?
General
