Fronius Pull - Pushpull Hosepack; General; Scope of Supply

PushPull hosepack
General The Robacta MHPi RD hosepack is designed for gas-cooled and water-cooled ro-
bot applications. It connects the SplitBox to the wirefeeder.
The length of the hosepack depends on the robot.
The following combinations are available:
-
Robacta MHPi RD conventional
-
SB500i -> WF 25i Robacta Drive
-
SB60i -> WF 60i Robacta Drive CMT
-
Robacta MHPi RD PAP
-
SB500i -> WF 25i Robacta Drive
-
SB500i -> WF 60i Robacta Drive CMT
-
SB60i -> WF 60i Robacta Drive CMT
-
Robacta MHPi RD conventional with external wirefeeding hose
-
SB500i -> WF 25i Robacta Drive
-
SB500i -> WF 60i Robacta Drive CMT
Scope of supply
Robacta MHPi RD conventional hosepack Robacta MHPi RD PAP hosepack
Robacta MHPi RD hosepack with external
wirefeeding hose
Not supplied:
-
Inner liners
-
Inlet nozzles
54