Fronius Pull User Manual

Status indicators The following statuses may be indicated on the display of the WF 25i Robacta
Drive / WF 60i Robacta Drive CMT:
Normal operation
Error in
Stop / Robot not ready
Gas testing is active
No connection to the control
Update
Teach mode active
Wire threading active
Wire retract active
In applications with a double-head wirefeeder, when process line 1 is
selected.
2 and 3 light up on the other process lines but are smaller in size
In applications with a double-head wirefeeder, when process line 2 is
selected.
1 and 3 light up on the other process lines but are smaller in size
In applications with a double-head wirefeeder, when process line 3 is
selected.
1 and 2 light up on the other process lines but are smaller in size
79
EN

Fronius Pull Specifications

General

Brand	Fronius
Model	Pull
Category	Welding System
Language	English