Fronius Pull - Control Panel

No. Function
(1) Cover
(2) Protective cover for the 4-roller drive
(3) 4-roller drive
(4) Protective cover for the 2-roller drive
(5) 2-roller drive
(6) Opening for optional sash lock
(7) Control panel
(8) SpeedNet connection
(9) Blanking cover for optional component
(10) Blanking cover for optional component
(11) Blanking cover for optional component
(12) M20 thread
for connecting QuickConnect option
(13) Wire infeed/outfeed tube
Wire infeed (underside)
Wire outfeed (top)
Control panel
(1) (2) (3) (4)
Gas test / wire threading control panel
No. Function
(1) Operating status LED
Shows steady green when the
device is ready for use
(2) Gas-test button
For setting the required gas
flow rate on the pressure regu-
lator
Gas will flow out for 30 seconds
after the gas-test button is
pressed. Press the button again
to stop the gas flow prema-
turely.
82